Investigating the impact of the diameter of the solar collector on the output power of the solar chimney system
DOI:
https://doi.org/10.59743/jau.v9i1.2024Keywords:
Power, Collector, Chimney, Solar, diameter, prototypeAbstract
The aim of this of paper is to study the effects of the collector radius of a solar chimney power plant (SCPP) on the power output of a solar chimney system. The data was collected from a small prototype solar chimney which was conducted at the College of Engineering, Sabratha. Geometric measurements were taken from the first model used in Manzanares, Spain. In this research, the height of the chimney was fixed at 194.6 m, the geometric dimensions of the solar chimney station were fixed and, the value of the collector radius was varied for energy production .The power output value was calculated for each radius. MATLAB software was used as numerical solution tool to assess the thermal behavior and performance of a solar chimney power plant . The maximum value obtained for the output power was 192.19 kilowatts with a diameter of 544 meters whereas the lowest value was 55 kilowatts with a diameter of 244 meters. Both values were obtained at the same time at 3 p.m. which shows the effect of the collector radius on the amount power produced. Also, it was concluded that the theoretical power output of SCPP is directly proportional to the radius of the collector.
References
. Galia, R. A., Arebi, B., & Shuia, E. (2017). Investigation of Solar Chimney System and the Effct of Thrmal Storage Capacity on the System Performance Part I: Experimental Investigation. Solar Energy and Sustainable Development Journal, 6(2), 55-70. DOI: https://doi.org/10.51646/jsesd.v6i2.48
. Harun, Ş. E. N., CÜCE, A. P. M., & Erdem, C. Ü. C. E. (2021). Impacts of collector radius and height on performance parameters of solar chimney power plants: a case study for Manzanares, Spain. Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 2(2), 83-104. DOI: https://doi.org/10.53501/rteufemud.1017909
. Patel, S. K., Prasad, D., & Ahmed, M. R. (2014). Computational studies on the effect of geometric parameters on the performance of a solar chimney power plant. Energy conversion and Management, 77, 424-431. DOI: https://doi.org/10.1016/j.enconman.2013.09.056
. Ahirwar, M. J., & Sharma, P. (2019). Analyzing the effect of solar chimney power plant by varying chimney height, collector slope and chimney diverging angle. International Journal of Innovative Research in Technology, 6(7), 213-219.
. Lahcene, A., Benazza, A. Y., & Benguediab, M. (2020). The Effect of Geometric Parameters on the Performance of Solar Chimney: A Numerical and Experimental Study. Engineering, Technology & Applied Science Research, 10(6), 6456-6461. DOI: https://doi.org/10.48084/etasr.3901
. YAPICI, Ekin Özgirgin; AYLI, Ece; NSAIF, Osama. Numerical investigation on the performance of a small scale solar chimney power plant for different geometrical parameters. Journal of Cleaner Production, 2020, 276: 122908.
. Yapıcı, E. Ö., Ayli, E., & Nsaif, O. (2020). Numerical investigation on the performance of a small scale solar chimney power plant for different geometrical parameters. Journal of Cleaner Production, 276, 122908. DOI: https://doi.org/10.1016/j.jclepro.2020.122908
. Galia, R. A. (2021). Study effect of chimney height on the output power of the solar chimney system.
. Petela, R. (2009). Thermodynamic study of a simplified model of the solar chimney power plant. Solar energy, 83(1), 94-107. DOI: https://doi.org/10.1016/j.solener.2008.07.001
. Zhou, X., Yang, J., Xiao, B., Hou, G., & Xing, F. (2009). Analysis of chimney height for solar chimney power plant. Applied Thermal Engineering, 29(1), 178-185. DOI: https://doi.org/10.1016/j.applthermaleng.2008.02.014
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2024 ربيع الباروني قلية، محسن فرعون أحمد
This work is licensed under a Creative Commons Attribution 4.0 International License.
The rights relate to the publication and distribution of research published in the Journal of Alasmarya University where authors who have published their articles in the Journal of Alasmarya University should Know how they can use or distribute their articles. They reserve all their rights to the published works, such as (but not limited to) the following rights:
- Copyright and other property rights related to the article, such as patent rights.
- Copyright on all open access article in Journal of Alasmarya published by Alasmarya Islamic University is retained by the author(s) and they can used in it's future works, including lectures and books, the right to reproduce articles for their own purposes, and the right to self-archive their articles..
- Authors grant Alasmarya Islamic University a license to publish the article and identify itself as the original publisher.
- Authors also grant any third party the right to use the article freely as long as its integrity is maintained and its original authors, citation details and publisher are identified.
The Creative Commons Attribution License 4.0 formalizes these and other terms and conditions of publishing articles