A NEW CMOS DESIGN AND ANALYSIS OF CURRENT CONVEYOR SECOND GENERATION (CCII)

المؤلفون

  • MAHMOUD AHMED SHAKTOUR Elmergib University, Faculty of Science, Department of Physics
  • FATHI OMAR ABUBRIG Al- Asmarya Islamic University, Faculty of Science, Department of Physics
  • AlAA YOUSEF OKASHA Elmergib University, Faculty of Science, Department of Physics

DOI:

https://doi.org/10.59743/aujas.v2i2.1109

الكلمات المفتاحية:

Bulk-Driven transistors، Current Conveyor of Second Generation CCII، CMOS integrated circuit، PSPICE simulation

الملخص

This paper describes the current conveyors used as a basic building block in a variety of electronic circuit in instrumentation and communication systems. Today these
systems are replacing the conventional Op-amp in so many applications such as active filters, analog signal processing. Current conveyors are unity gain active building block having high linearity, wide dynamic range and provide higher gain bandwidth
The proposed current conveyors are simulated using TSMC 0.18μm CMOS technology on Advanced Design System and the results are also tabulated for comparison. The main features of these current conveyors are low voltage, less power, high slew rate and wide bandwidth for voltage transfer (Vy to Vx) and current transfer (Ix to Iz) which make them suitable for high frequency and low power applications.

المراجع

SMITH, K.C., SEDRA, A. "The current conveyor: a new circuit building block". IEEE Proc. CAS, 1968, vol. 56, no. 3, pp. 1368-1369. DOI: https://doi.org/10.1109/PROC.1968.6591

CHUN-MINGCHANG. "Multifunction biquadratic filters using current conveyors"., IEEE Transaction on Circuits and Systems-II, Analog and Digital signal processing, vol. 44, no. 11, pp.956-958, 1997. DOI: https://doi.org/10.1109/82.644049

R V Yenkar, R S Pande and S S Limaye. "The Survey of Historical - Technical Development In Current Conveyors And Their Applications". IJCA Proceedings on National Conference on Innovative Paradigms in Engineering and Technology (NCIPET 2012) ncipet (4):17-23, March 2012.

B. Wilson, "Recent developments in current conveyors and current-mode circuits", IEE Proceedings, 1990, 137(2) pp. 63-77 DOI: https://doi.org/10.1049/ip-g-2.1990.0014

Liu, Tsao, J. Wu and Tsay, "Nonlinear circuit applications with current Conveyors", IEEE Proc. 140(1), 1993, pp. 1-6. DOI: https://doi.org/10.1049/ip-g-2.1993.0001

Sedra A, Robert G, Gohn F S: The current conveyor: history and progress, IEEE International Symp. on Circuits and Systems, Portland, USA, 1989,3, pp. 1567-1570.

Grigorescu L, "Amplifier built with current conveyors", Rom. Journ. Phys., 2008, 53(1- 2) pp. 109-113.

Senani R, "Novel application of generalized current conveyor", Electronics Letter, 1984, 20(4), pp. 169-170. DOI: https://doi.org/10.1049/el:19840113

KHATEB, F., BIOLEK, D., NOVACEK, K. "On the design of low-voltage low-power bulk-driven CMOS current conveyors".

Shaktour, M. "Design of low power low voltage bulk driven operational transconductance amplifier", Poznan University of Technology Academic Journals, Poland, 2014, 19, pp. 63-70.

التنزيلات

منشور

30-12-2017

كيفية الاقتباس

SHAKTOUR, M. A., ABUBRIG, F. O., & OKASHA, A. Y. (2017). A NEW CMOS DESIGN AND ANALYSIS OF CURRENT CONVEYOR SECOND GENERATION (CCII). مجلة الجامعة الأسمرية, 2(2), 55–64. https://doi.org/10.59743/aujas.v2i2.1109