Determination the Concentrations of Heavy Metals in Seawater Intake of Desalination Plant

E. M. Abogrean; L. O. Abogrian

doi:10.59743/jmset.v1i1.139

Authors

E. M. Abogrean Biotechnology Research Center (BTRC), Tripoli, Libya.
L. O. Abogrian The Higher Institute of Technical Agriculture-Al-Geeran, Tripoli, Libya.

DOI:

https://doi.org/10.59743/jmset.v1i1.139

Keywords:

Desalination plants, EIA, heavy metals, precipitation

Abstract

The desalination plants are considered to have a major role in developing human life. Recently this technology has become widely distributed along the coastal area. Many countries are adopting these technologies for securing the freshwater supply for consumer consumption all over the world. Therefore, it's necessary to evaluate the Environmental Impact Assessment (EIA) of these technologies on the coastal line.

This study has been monitoring seawater quality used for feeding desalination plants to determine the heavy metals of iron (Fe), copper (Cu), manganese (Mn), and zinc (Zn) by using the chemical monitoring system to know their effects on the desalination units and other components. This study was conducted in the year 2010 from March to October, samples were collected from feed water intake of Tripoli’s West Desalination Plant (Janzour), the plant was chosen because of its importance in supplying fresh water for potable water and industrial uses.

The results of this study showed monthly differences in most tested parameters. These differences lead to scale and corrosion by precipitation on the components of the desalination units. On the other hand, the concentration of Fe, Cu, Mn, and Zn were very high compared to the standard rates of the seawater. The mean concentration in ppm at sites 1 and 2 of Fe, Cu, Mn, and Zn were (0.044 & 0.043), (2.30 & 2.85), (0.0585 & 0.0593), and (0.0712 & 0.0713) respectively.

References

Ahmed M., Shayya W.H., Hoey D., & Al-Handaly J. (2001). Brine disposal from reverse osmosis desalination plants in Oman and United Arab Emirates. Desalination, 133: 135-147.

Bradl H. (2005). Heavy Metals in the Environment: Origin, Interaction and Remediation Elsevier/Academic Press, London.

Desalination & Water Reuse, Vol. 614, February– March 1997 IDA, Florida, USA.

Dural M., Goksu M.Z.L., & Ozak A.A. (2007). Investigation of heavy metal levels in economically important fish species captured from the Tuzal Laagoon. Food Chem., 102: 415-421.

Hassan M., & Elaber S. Tripoli, Operation & maintenance of MSF Desalination plant, Training course, GECOL & PRC, Libya, 2003.

Hoepner T., & Lattemann S., (2002). Chemical impacts from seawater desalination plants—a case study of the northern Red Sea. Desalination, 152: 133–140.

Lattemann S., & Hoepner T. (2008). Environmental impact and impact assessment of seawater desalination. Desalination, 220: 1–15.

APHA, AWWA, & WPCF (1975). Standard Methods for the Examination of Water and Wastewater. 14th ed., Washington DC.

GECOL (2003). The Annual Report of General Electricity Company of Libya for 2003. Desalination Department Eastern side, GECOL.